We learn how to make shelves in a bath
No full rest can be imagined without a real Russian bath. But it will also be difficult to call it, if there are no normal regiments in the bathhouse.
And their arrangement is sufficientstrict requirements, because otherwise the design simply can not withstand the temperature changes that are in this room. So how do you make poles in a bath that will serve you faithfully for more than one season?
Basic principles of construction
Any sauna shop consists of two mainelements: support racks and flooring. The main strength requirements are imposed on the middle beam, which passes through the entire deck and joins with two supports using cross bars.
It is necessary to fill the boards with the centralflooring so that there is a gap between them of not less than 1.5-2 centimeters. For the whole structure to dry faster and get wetter, it is made with a slight bias.
Little about the size
Before you make the shelves in the bath,it is recommended to remember that their minimum width is one and a half meters. And do not forget that the first step must necessarily be at least 90 cm. The remaining "steps" are reduced by 15-20 cm.
This requirement is due to the fact that the polkatiers, placing them along those walls, on which there are no windows. Separation of the tiers allows you to meet the needs of people who like different temperatures in the steam room.
If you make a hinged shelves for a bath, then there is no choice: the swivel connection is preferable to do either at the highest level, or to lower it to the very bottom.
From what to do?
The best tree for this kind of shop isLinden. It has long been known that its pleasant aroma when heated not only soothes, but also has a beneficial effect on health. Since it is very easy to make poles in a linden bath (it is soft), it can be recommended to beginners in construction.
The second suitable breed is aspen. It is durable, poorly absorbs moisture and sweat. The only drawback is its hardness, because of which it is necessary to take only the best quality tools for processing.
Mount the frame
Before making shelves in a bath, you need toprepare several racks. Most often take ten bars, the dimensions of which correspond to 50x70x1090 mm. Between them, they are fastened with small crossbars from the same wood. As fasteners use conventional wood screws. But they are only suitable for attaching boards to the frame, since the masters use a completely different way.
How to connect
Real professionals use for this oakwedges that are driven into pre-drilled holes. But because of the hassle of this method, you can often find self-tapping screws or even nails. If you use them, be sure to heat your hats as deep as possible in the wood, drilling for this purpose chamfers.
On the need for backs
We have already said that the lowest regiment is being madefolding. In many ways, this design is due to the fact that it is easier to take care of it. As a result, the wall serves as the back. Given that there is a similar situation in other cases, there is simply no need for individual backs.
We hope that you will have comfortable shelves in the bath. How to make them, you already learned.