Activator of water AP-1: specifications, operating instructions. Living, dead water
The water activator AP-1 is aA modern device that is intended for the transformation of fluid from the dead into the living. Perhaps many people did not even suspect the presence of such devices on the market. But they are. And deserve their popularity due to unsurpassed features and quality of water, which is a real life-giving moisture. This device operates on a 220 V network, and consumes a small amount of energy. However, its performance is quite large. Thus, in just half an hour the equipment is able to prepare approximately 1.5 liters of activated water, which has a huge number of useful properties. You can buy these devices for 2640 rubles.
In some cases, when an activator is usedwater, electroactivator AP-1, consumers are faced with such a problem as a breakdown of the liquid container. In this case, you can buy it additionally. The cost of this component is 300 rubles. While the price of a set of test strips is 250 rubles, in one package - 100 pieces.
Advantages of the activator AP-1 in version 1
The water activator AP-1 has a lot ofadvantages. Among them, for example, is low power consumption. With the operation of such a device, the meter will only "wind up" as much as necessary to operate a 40-watt bulb. It is important to take into account also a rather high speed of water treatment, as well as a unique opportunity to produce live water. However, if necessary, you can work out with this device a dead liquid, which is also called anolyte. The electric activator is used for cooking water at home. It has compact dimensions, low weight and ease of use. The water activator AP-1 is certified. It has a long service life, which reaches 5 years.
The main characteristics of the AP-1 electroactivator in version 1
Power equipment comes from the electricnetwork (220 V). The maximum power consumption is 70 watts. The maximum time for the electroactivation of water is 40 minutes, and the volume of the resulting liquid is 0.3 liters, if it is anolyte, and 0.9 liters for the catholyte. During electrolysis, the current can vary from 0.2 to 0.7 A. The weight of the equipment is negligible. It is 1.6 kg. This equipment is manufactured in Belarus, the city of Gomel. The manufacturer gives its warranty on the device, which is one year.
Operating Instructions for the Activator AP-1 in version 1
The water activator AP-1 should be used inaccording to the instruction. Before processing the liquid from the device, it is necessary to remove the top cover, and after installing the ceramic cup in the center of the main container. Water is poured into it until it is full, which you want to activate. It is poured into the main compartment, and its level should not be more than 15 mm from the top of the glass. The main container is closed on the next stage with a lid. It must be done so that the arrows point to each other. Light anodes should be outside the glass, while black anodes should be inside it.
Additional recommendations for use
The AP-1 device should be used according toinstructions. At the next stage, it involves the inclusion of electrical appliances in the network. You will realize that it works when the voltage indicator lights up. It signals the work. It is important to remember the activation time of the activator, leaving it to work for a certain period. The longer the period of operation of the device will be, the higher the concentration of nutrients in the water. As a rule, it is enough and 10 minutes.
Package Contents AP-1
Electroactivator AP-1 is supplied complete withinstructions for use, a measure for table salt, as well as a fuse-link. Before purchasing the product, you should familiarize yourself with the bundle so that you do not have to visit the store again.
Features of the AP-1 electroactivator in version 2
This device is designed forpreparation of two types of activated water. It can be catholyte and anolyte. The latter variant is acidic water and has a bactericidal effect. The liquid can be used for disinfection. But the catholyte is alkaline water. It tones up and acts as a source of energy and stimulant. It is noteworthy that the manufacturer puts a special glass to the set of this equipment as a gift. Pay for the set of test strips for this equipment you need as much as in the above case. This applies to the cost of spare capacity. But for the equipment will have to give 2950 rubles.
Main advantages of execution 2
The domestic water activator described above possessesalmost similar characteristics in comparison with those that have version 1. In just 20 minutes the device will process approximately 1.5 liters of water. It has ease of use and compactness. As practice shows, it is completely electrically safe. The minimum service time is 5 years. A special indicator for water comes in the kit.
Principle of operation
Living water can be obtained byactivator of water AP-1 in version 2. The principle of its operation is that during the electrolysis in the glass anolyte is formed, while in the main container catholyte will be formed. The lid with electrodes has anodes. They are elements of black color. There are also light cathodes that interact with water and allow it to activate. The anodes are capable of increasing the acidity of the liquid, and also increase the chlorine content in it, reducing the concentration of hydrogen and nitrogen. In addition, they increase the volume of oxygen.
If we are talking about cathodes, then they make wateralkaline. Its structure changes significantly. In it, oxygen appears, and nitrogen is almost exhausted. As for free hydroxyl groups, their volume increases. The same can be said about hydrogen.
Characteristics of the activator brand AP-1 in version 3
Living water can be obtained bydevice, which is manufactured and sold under the name AP-1 in version 3. This device is the most modern of the models described above. This version is distinguished by a special layer on the electrodes, which in just 20 minutes allow to obtain 1.5 liters of activated liquid. Among other things, the equipment has an indicator of the saturation of the solution, which is also in the above-described units.
If you want to activate exchange processesbody, heal wounds, increase appetite and normalize the work of the food tract, then you should use live water. It is a biological stimulant. The water activator AP-1 (version 3) allows to get a liquid that tastes like a rainwater and has an alkaline reaction. Prepared catholyte is recommended to store in a dark place. No air should come to him. Only in this way you will be able to maintain the curative properties of the liquid, and it should be used within a week.
Why should you use dead water?
Dead water is also called anolyte. It is the most powerful natural antiseptic. With its help, you can slow down biological processes using a liquid for disinfection. It helps to reduce pain. Anolyte and catholyte are a natural product. It is not capable of causing allergic reactions, is completely harmless and non-toxic.
Reviews about the devices
If you decide to purchase an activator of water AP-1,reviews about it are recommended to read before going to the store. According to buyers, the ceramic glass plays the role of a diaphragm. It is located between the anode and the cathode. It is there that the anolyte is formed - dead water. As the users emphasize, at the bottom of the cover there are electrodes. They are on the surface, which is made of insulating material and has a special chemical coating of black color. But the cathodes are made of food grade stainless steel. Electrodes are not capable of electrochemical destruction.
The water activator AP-1 (version 2), in the opinion ofbuyers, should be used for a certain temperature range, which is limited to a limit of +5 to +40 ° C, while the relative humidity of the outside air should not exceed 80%. It is noteworthy that catholyte can be used for soaking seeds. With its help, it is possible to stimulate the growth of plants, and also to enhance the properties of soluble substances. The activator corresponds to the second class of protection according to the state standard 30345.0 of electrical safety. Users are sure of the hygienic safety of the activator. But this is also confirmed by an act of state expertise, which is issued by the appropriate authority.
The devices described above are ratherlight, not at all difficult to use, compact devices. With their help, every user at home can get about 1.4 liters of activated water. The latter can be prepared in only 20 minutes. This value is average. The minimum period is 10 minutes, while the maximum time is 40.
In order to prepare a liquid, it is necessaryfill the vessel with water. After that, the plug is plugged into a 220 volt socket. After a while, the activated water can be drained into different vessels. It is noteworthy that the liquid can be used not only to treat a person and activate the work of all his internal organs. This water is excellent for increasing the growth rate of plants, which until this time suffered from various diseases and could not fully develop.